• Product features
This is a by-pass type oil purifier with its own oil pump embedded in the oil cleaner. As with no pressure loss, it is widely used for attachment to all equipment or movement.
- Reasonable purification control with unmanned operation reservation
- Determination of the replacement time of an element and maximization of filtering efficiency by
adopting a control valve
- Easy cleaning and replacement in a short time for the open type suction strainer
- With the adoption of the dust proof gauge, you can check accurate pressure, contamination state,
and accurate replacement time of an element.
- Easy oil transfer with the adoption of the drain valve
- Efficient purification care by recording purification time
- Special specifications are custom-made
Discharge rate |
1,130 ℓ/hr |
Filter applied
| F-180 |
Power |
220V, 1ø, 380V, 3ø |
Number of filter used
| 5EA |
Filtering capability |
NAS 5-7 Class |
Suction strainer
| 100mesh |
Range of service pressure |
0.1 ~ 0.55 Mpa |
IN, OUT Caliber
| 3/4" |
Filtering particle size |
over 0.1μ |
Maximum service temperature
| 90℃ |
Maximum use |
VG220 |
Weight
| 125kg |
Water holding capacity |
50ppm |
Dimension of the main body
| |
• Other matters (effects)
Maintaining high purity oils with NAS 5-8 class (ISO 15/12-ISO 17/14) by removing various foreign substances and water.
- Cost reduction of new oil replacement by drastic extension of oil life (over 7 times)
- Productivity improvement by preventing various troubles like valve choking
- Machine life extension by wear rate reduction
- Electric rate reduction by optimum power use
- Prevention of environment contamination due to waste oil reduction